home *** CD-ROM | disk | FTP | other *** search
/ Network Supervisor's Toolkit / Network Supervisor's Toolkit.iso / novell / fyi7 / 06182.dos < prev    next >
Text File  |  1996-07-10  |  3KB  |  60 lines

  1.                        TECHNICAL BULLETIN 
  2.                          Bulletin #1-269 
  3.  
  4. Date:  April 27, 1990 
  5.  
  6.               Error in 3Com Installation Supplement 
  7.  
  8. The addendum to the NetWare Installation Supplement for 3Com
  9. Etherlink and Etherlink Plus (revision 1.00, P/N 101-385-001)
  10. contains erroneous information.  Specifically, the configuration
  11. option table (Figure 2) is incorrect for every option.  The correct
  12. configuration option information for DOS is listed below.  
  13.   
  14.      3Com 3C503 EtherLink II  
  15.   
  16.      0.   I/O = 300h, INT = 3, DMA = 1, BNC  
  17.      1.   I/O = 310h, INT = 2, DMA = 3, BNC  
  18.      2.   I/O = 330h, INT = 4, RAM = C8000, BNC  
  19.      3.   I/O = 350h, INT = 5, RAM = CC000, BNC  
  20.      4.   I/O = 250h, INT = 3, RAM = D8000, BNC  
  21.      5.   I/O = 280h, INT = 2, RAM = DC000, BNC  
  22.      6.   I/O = 2A0h, INT = 4, DMA = 1, BNC  
  23.      7.   I/O = 2E0h, INT = 5, DMA = 3, BNC  
  24.      8.   I/O = 300h, INT = 3, RAM = C8000, BNC  
  25.      9.   I/O = 310h, INT = 2, RAM = CC000, BNC  
  26.      10.  I/O = 330h, INT = 4, RAM = D8000, BNC  
  27.      11.  I/O = 350h, INT = 5, RAM = DC000, BNC  
  28.      12.  I/O = 250h, INT = 3, DMA = 1, BNC  
  29.      13.  I/O = 280h, INT = 2, DMA = 3, BNC  
  30.      14.  I/O = 2A0h, INT = 4, RAM = C8000, BNC  
  31.      15.  I/O = 2E0h, INT = 5, RAM = CC000, BNC  
  32.      16.  I/O = 300h, INT = 3, DMA = 1, DIX  
  33.      17.  I/O = 310h, INT = 2, DMA = 3, DIX  
  34.      18.  I/O = 330h, INT = 4, RAM = C8000, DIX  
  35.      19.  I/O = 350h, INT = 5, RAM = CC000, DIX  
  36.      20.  I/O = 250h, INT = 3, RAM = D8000, DIX  
  37.      21.  I/O = 280h, INT = 2, RAM = DC000, DIX  
  38.      22.  I/O = 2A0h, INT = 4, DMA = 1, DIX  
  39.      23.  I/O = 2E0h, INT = 5, DMA = 3, DIX  
  40.      24.  I/O = 300h, INT = 3, RAM = C8000, DIX  
  41.      25.  I/O = 310h, INT = 2, RAM = CC000, DIX  
  42.      26.  I/O = 330h, INT = 4, RAM = D8000, DIX  
  43.      27.  I/O = 350h, INT = 5, RAM = DC000, DIX  
  44.      28.  I/O = 250h, INT = 3, DMA = 1, DIX  
  45.      29.  I/O = 280h, INT = 2, DMA = 3, DIX  
  46.      30.  I/O = 2A0h, INT = 4, RAM = C8000, DIX  
  47.      31.  I/O = 2E0h, INT = 5, RAM = CC000, DIX  
  48.  
  49. Although the supplement is incorrect, the correct options are
  50. displayed when choosing the configuration in SHGEN under DOS. 
  51. However, when the Multiple Link Interface Drivers (MLID) are
  52. installed as device drivers under OS/2, the configuration options
  53. are not displayed.  The default configuration for OS/2 is: 
  54.  
  55.      I/O = 300h, INT = 3, RAM = C8000, BNC  
  56.  
  57. Note that the Base Memory Address may not be set to "Disabled" when
  58. running the 3C503 board with the NetWare Requester for OS/2.  See
  59. the NetWare Requester for OS/2 Supplement for additional
  60. information on reconfiguring the NetWare Requester.